For information on ordering speaker spacers for the Subaru BRZ, Scion FR-S, and Toyota GT86 please visit the link below:
http://www.subaruaudio.net/subaru-speaker-spacers/subaru-brz-and-scion-fr-s/
Here is a great thread by a user of my adapters that has some great info and links:
http://www.ft86club.com/forums/showthread.php?t=33382
Credit to user -max- on www.ft86club.com/forums for this step-by-step “How-to” guide on the removal of the door panels.
There are 3 screws that need to be removed.
First is inside the door handle.
Second 2 are under the door pull handle.
So first you must pull off the trim piece that covers the screws. Start at the bottom.
The 2 screws are behind.
Last thing to remove is the clip in the upper forward door. Just use a flathead screwdriver to pop it out.
Now you just pull the door panel off. There are a bunch of clips inside and it takes quite a bit of force to get off. This is where you will want to use plastic panel tools, which are available through stores such as Harbor Freight or through almost any automotive supply store.
Once you get it loose you will have to disconnect the cables that hook to the lock and door handle.
Last thing holding on are the wire plugs connected to power window and locks.
Please see the page related to deadening for information on door deadening.
http://www.subaruaudio.net/tools-and-how-to/deadening/
Speaker installed in the subaruaudio.net spacers:
To install the speaker spacers, please follow the general installation instructions found here:
http://www.subaruaudio.net/subaru-speaker-spacers/directions/
More installation pictures:
1 thought on “’13+ BRZ / FR-S / GT86”
Comments are closed.